Universal Dent Repair Kit
Suitable for removing minor dents in almost any place on any vehicle.
Works by applying glue on the appropriate size puller tab, which is then set on the dent and manually pulled by tightening the tab bolt via a tightening knob on the puller handle.
Comes with 5 pcs high quality different sizes tabs, for easily repairing different dent sizes.
NOTE: Requires the use of glue and a glue gun which are available separately.
No chemicals or other toxic material used in the process, so avoids any damage to your car’s surface.
Suitable for all kinds of vehicles, but can also repair dent problems on most sheet metal surfaces.
Instructions:
- Clean damaged surface with a damp clean cloth.
- Place some hot melt glue on glue gun and heat for about 5-10 minutes.
- Apply the extruded glue on the appropriate size puller tab.
- Immediately place tab in the center of the dent and hold until it sticks.
- Place stem of tab through the hole pulling bridge and cap with the tightening knob.
- Tighten knob until the tab pops off.
- Clean the surface.
What’s Included:
- 1 puller bridge
- 5 different sizes puller bolts
- 1 tightening knob
- 1 center punch marker
